Dr. Dabber Switch

Dr. Dabber Switch "Portable" Vaporizer

The Dr. Dabber Switch is a battery powered induction rig that puts out thick, lung busting clouds in less than 10 seconds.

The Dr. Dabber Switch is one of the first induction vaporizers; instead of standard conduction or convection the Switch heats the loading chamber in moments using a battery efficient magnetic field. The DDS' 120W max output is able to heat the included ceramic loading cups in around 5 seconds. The included tree perc bubbler attaches to the top of the chamber for smoother, water cooled draws and can also be used dry. The Switch is powered by a 33.3 watt hour battery pack constructed from non-volatile LiFePO4 batteries, some of the safest available. The Switch's battery pack charges from empty to full in about an hour, is fully removable and provides around 100 heat-ups per charge. You can also use the Switch while plugged in instead of waiting for it to charge. The DD Switch and accessories are iso safe for easy cleaning and the self cleaning cycle makes it even easier.

Note: We don't recommend using the Switch in dry material mode due to combustion.

Key Features

• Induction Heating
• Approx. 4-6 Second Heatup Time
• Ceramic Loading Cups
• 120W Max Output
• 33.3 Watt Hour Battery Capacity
• Approx. 100 Heats Per Charge
• Removable Battery Pack
• LiFePO4 Non-Volatile Battery Cells
• 1 Hour Charge Time
• Usable While Charging (Pass-Through)
• Voltage, Current, Short-Circuit, Reverse Polarity Protections
• 6 Arm Tree Bubbler - Borosilicate Glass
• Self Cleaning Mode
• Dimensions: 10" x 4"
• American Style Plug

Using the Dr. Dabber SWITCH

Operating: Flip the bottom switch on the base to the liquid icon to enter liquid mode. Place your material into the bottom of the white or black ceramic induction cup and place the cup into the chamber. Your temperature is set using the up and down buttons on the body of the unit. We recommend setting 3 for the best mix of flavor and clouds. The upper two settings run much hotter, trading flavor for the biggest draws. When your temperature setting is saved the LEDs will flash pink and indicate remaining battery level. Place the glass bubbler piece on top of the chamber and the glass carb on top to seal off the chamber. Press the main button in the center to begin heating; once the red light goes green you're ready to go. The Switch is deactivated by returning the bottom switch to the center position.

Cleaning: The Switch and all accessories can be easily swabbed down with 90%+ isopropyl alcohol. The Switch also has a self cleaning cycle that burns away solid residue from the ceramic induction cups. Place your cup inside, set your temperature to 5 and then hold the + button until the lights go red and the cleaning cycle begins. Once the cycle is over the Switch will revert to the heat setting used before moving up to 5. Pressing the center button during the self cleaning cycle ends it immediately.

Included Items

• Dr. Dabber Switch
• White Ceramic Induction Cup
• Black Ceramic Induction Cup
• Tree Percolator Attachment
• Glass Tool / Carb Cap
• Silicone liquid Container
• Reverse Tweezers
• Ceramic Filter
• Reference Cards