Your input is very much appreciated. Share it with your friends so they can enjoy it too!
I was drawn in by the "3D Divots to Cool Vapor" and thought I would try it. If the divots didn't work then it would still function the same as the official ones without and no harm done. Unfortunately the diameter is to small it doesn't fit the Fury 2 properly. It is quite loose and wiggles around and can spin freely. I have the official bubbler and it fits snuggly. I would say don't buy this. You can save a few bucks and get the official one. Sure, it might not cool the vapor quite as much but it is not worth it at all to get this. Edit: I saw someone else posted a review saying the looseness is normal and my review is unwarranted. This is not the case. I have used other glass pieces with my Fury 2 and they are all the right size and operate how I would expect having already known about the chamber size difference when heated. This piece is objectively too small. It sits at an angle and wiggles around no matter the temperature. Maybe mine is abnormal in some way.
First, I have talked with Healthy Rips about about the fit of the glass. The chamber expands when it heats up. This causes the glass to be loose. In the new Fierce, they have added a plastic sleeve to stop the wiggling, but not for the Fury. If the glass is tight when hot, then when the chamber cools, it shrinks and will get distorted by the harder glass. So, it is better to always remove the glass when the Fury turns off, if you can remember. Anyway, this Puffitup glass fits similarly to the Healthy Rips glass, so the other guy's low rating is not warranted. This mouthpiece does cool more than the shorter HR one. I would prefer one even longer than this 3D Flow glass, but without the 3D divots because they make it hard to get a pipe cleaner in there. The glass seems slightly thicker than the HR glass, so this means it will likely last longer without breaking. Despite the cleaning problems, this is still my preferred mouthpiece for the Fury.