The Sai Plus wax attachment is built from heavy duty metal for maximum durability and a premium look and feel. It features the same top/bottom adjustable airflow design as the TAF, for full airflow control. The top section has an integrated splash guard to protect against oil splatter and the mouthpiece is fully removable. The Sai Plus is 510 threaded for compatibility with nearly every sub-ohm box mod. The Sai Plus is compatible with several optional styles of heating coils; each heating coil has different strengths and all perform differently to suit all styles of fully melting concentrate. They are easily removed and replaced for cleaning or swapping coils. One Titanium Bucket Coil with an embedded ceramic heater is included with the Sai Plus so all you need is a 510 threaded box mod (with enough room for this big boy to fit on top) and some oil to bring the clouds.
First choose your wattage; we recommend starting on the low end of the recommendations listed above and working your way up if needed. Thread the Sai Plus's base into the 510 connection of your power source then tighten the atomizer inside the Sai Plus to ensure a proper connection. Condition your new atomizer by heating it near the top of the listed wattage range for a couple pulses of 5 seconds each. All Sai Plus coils are loaded by placing a small amount of material onto the heating element and gently pulsing the heat a couple times to melt your material into position. Place the top cover piece back on and you're ready to rip. All Sai Plus parts except for the rubber o-rings can be soaked in isopropyl alcohol for easy cleaning.